QuiqLite X2 LED Light (Red)


MoonLight Mode:
5 Lumens: Up to 40 hours run time

Low Power:
20 Lumens: Up to 12 hours run time
High Power:
100 Lumens: 1.5 hours
200 Lumens: 60+ minutes

Safety Strobe:
4+ hours continuous


– USB Type-C Rechargeable Lithium battery
– 7 modes
– Lumen / Brightness memory
– 5 up to 200 lumens of light output
– 20-minute auto-off battery saving timer
– Magnetic Aluminum Housing
– Dual independent programmable LED strip
– Magnetic rotating removeable QuiqClip
– Adjustable LED light arm
– Safety Strobe Red/White LED

QuiqLiteX2 Limited Lifetime Warranty

QUIQLITE, INC. warrants this QuiqLiteX-branded hardware product against defects in materials and workmanship under normal use for the lifetime (5 years) of the product from the date of retail purchase by the original end-user purchaser (“Warranty Period”). If a hardware defect arises and a valid claim is received within the Warranty Period, at its option and to the extent permitted by law, QuiqLite Inc. will either (1) repair the hardware defect at no charge, using new parts or refurbished parts that are equivalent to new in performance and reliability, (2) exchange the product with a product that is new or refurbished that is equivalent to new in performance and reliability and is at least functionally. This warranty does not apply: (a) to consumable parts, such as batteries, or protective coatings designed to diminish over time unless failure has occurred due to a defect in materials or workmanship; (b) to cosmetic damage, including but not limited to scratches, dents, and broken plastic on ports; (c) to damage caused by use with non-QuiqLiteX products; (d) to damage caused by accident, abuse, misuse,
liquid contact, fire, earthquake or other external causes; (e) to damage caused by operating the product outside the permitted or intended uses described by QuiqLite Inc. QuiqLite warranty it’s QX2 replaceable lithium polymer battery rated at 300- 400 discharges will be free from manufacturing defects under normal use for 24
months after purchase.


For repair or replacement contact Customer Service at 866-496-2506 (toll free) or e-mail info@quiqlite.com to obtain a Return Merchandise Authorization number (RMA#). Then package the unit carefully and return (no CODs) to: QUIQLITE, INC.


QX2 Tactical is equipped with a white LED for normal reading and writing and a Red LED for tactical applications. QuiqLiteX2 is equipped with a 20-minute auto-off battery saving timer and continuous Safety Strobe.


1st push: Activates red LED light strip at low to high output (20 auto-off timer)
2nd push: Within 1 second of 1st push turns off the red LED light strip
and turns on the White LED light strip at desired output of 5 to 200 lumens (20 minute auto-off timer).
3rd push: Turns all LEDs off
Tactical Mode:
If 2nd push is delayed 2 seconds past 1st push, QuiqLiteX will auto shift into Tactical Mode allowing the red LED to turn off without having to toggle past the white LED.

* Push the power button again to turn the red LED off.
QX2 Boost Mode 
With white or red LED on, quickly double press the On/ Off to increase LED brightness from 5 (moonlight mode) to 200 lumens (full power).

(20 minute auto-off battery saving timer)

Brightness / Lumen Memory: 
*QX2 will activate at the last lumen/brightness setting*
Safety Strobe Feature:
QuiqLiteX2 is equipped with a continuous Red/White LED safety strobe feature for increased visibility. 
  1. Press and hold On button down for 3 seconds to active strobe function (strobe will not auto shut off).
  2. Press On / Off button again to turn off strobe.
Low Battery Warning:
QX2 is equipped with a low battery voltage warning. When 10% battery life is remaining (approximately 10 minutes of battery life) QX2 will flash the red LED quickly 2 times every two minutes, letting you know the battery is low and needs to charge.


  1. Remove QuiqClip from off the back of the light
  2. Clip QuiqLiteX2 into the shirt pocket fabric with the metal shirt pocket clip located under the adjustable LED light arm.
  3. Cover top of QuiqLite X2 with pocket lapel.
  4. QuiqLiteX2 is also designed to securely fit into MOLLE webbing on Law Enforcement and Military tactical vests (QuiqClip removed).
  5. Activate On/Off button through fabric of shirt pocket or between MOLLE webbing loops.
  6. Re-attach clip for thicker mounting applications up to 1” thick i.e. gun belt, cite book, sun visor, jacket or hat etc .The Quiq Clip is magnetic and will hold to most metallic objects.


QuiqLiteX2 uses a Type-C USB charging port located on the side of the product. Insert the supplied Type-C USB charging cord into the side of QuiqLiteX2 and plug directly into computer USB port or other Type-C USB port with a minimum output of 5 volts.

– Charging…Red LED is steady.
– Charged…Red LED is flashing.
– Charge time is approximately 2 hours